Table of Contents
Advertisement
Installation
It is important that you read through and follow the
instructions and directions below. Conduct installation
and connection in accordance with the separate
installation instructions.
Safety instructions
•
Connections to electricity, water and drainage must
be performed by a qualified professional.
•
Electrical, water and drainage installations must be
carried out by a qualified professional.
•
Always follow applicable regulations for water,
drainage and electricity.
•
An incorrect or flawed installation can result in higher
consumption of energy, water and detergent, which
can result in increased costs and poor dishwashing
results. In order to minimise noise it is important that
you follow the instructions.
•
Exercise caution during installation! Use protective
gloves! Always have someone assist you!
•
Place a watertight protective tray on the floor under
the dishwasher to prevent damage from any water
leaks.
•
Before screwing the dishwasher into place, test the
dishwasher by running the Rinse & Hold programme.
Check that the dishwasher fills with water and drains.
Check also that none of the connections leak.
WARNING!
Turn off the water supply when installing the dishwasher!
34
596
573
550
*
Door length
550
519
*
49
WARNING!
The plug must be disconnected or power to the socket
turned off while the work is carried out!
Transport protection for the door
Do not forget to remove the transport protection for the
door when unpacking the dishwasher.
2x
Setup
•
The recess and connection dimensions are included
in the separate installation instructions. Check that all
dimensions are correct before starting the installation.
•
Make sure the area on which the dishwasher is to be
installed is firm. Adjust the adjustable feet so that the
dishwasher is level. Tighten the lock nuts.
[mm]
1229
30
30-94
Advertisement
Table of Contents
