Table of Contents
Advertisement
Settings
Do as follows to open the settings menu:
1.
First, open the door. Turn off the dishwasher using the main power switch (press and hold). Release the
button.
2.
Press and hold the main power switch until the display lights up.
3.
Within five seconds, press and hold the Programme selector and the Long dry button.
+
4.
Release the buttons when the display shows
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if
you fail to open the settings menu the first time.
Current setting.
You can now adjust the following settings:
Button
Options
press
(Off)
(On)
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu.
(Off)
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
.
Press to save the set value and continue to the next
Current setting value.
Press to browse between setting values.
Settings
Child lock
(button lock)
Buzzer volume
setting.
Description
You can activate the child lock (button lock) option to
prevent children from starting the dishwasher.
Press the High temperature and Long dry buttons
simultaneously to temporarily deactivate the button
lock when you want to start the dishwasher. The button
lock is automatically reactivated after 2 minutes.
The dishwasher uses a buzzer to indicate when a
programme is finished or when a fault has occurred.
19
Advertisement
Table of Contents
