Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Atag VA98211QT/A08
Summary of Contents for Atag VA98211QT/A08
- Page 1 ATAG VA98211QT...
- Page 3 Operating Instructions Dishwasher ATAG VA98211QT Dear ATAG customer! We hope that you will have many years of use from your new machine. The machine has many features. To make the most of its functions, we recommend that you read the operating instructions before using the machine.
-
Page 4: Table Of Contents
Contents Front panel Troubleshooting Safety instructions Information for test institute Before washing for the first time Technical information Loading the dishwasher Installation Using the dishwasher Service Settings Programme chart Care and cleaning Your notes Front panel On/Left-on mode Rinse aid indicator High temperature Programme selector TAB (3-in-1/all-in-one detergent) -
Page 5: Safety Instructions
Safety instructions General Winter storage/Transport Read the operating instructions and keep them in a safe place! Store the dishwasher where the temperature remains above freezing. Never use the dishwasher for any purpose other than that specified in these operating instructions. Avoid long transport distances in very cold weather. -
Page 6: Before Washing For The First Time
Before washing for the first time Do as follows the first time: Programme key 1 Unscrew the lid as illustrated. Some dishwashers include programme keys in different 2 Place the funnel supplied with the dishwasher in the salt languages. Attach the programme key in the desired language compartment top-up hole. -
Page 7: Loading The Dishwasher
Loading the dishwasher Economic dishwashing NOTE! Run programmes only with a full load After topping up, it may take a while before the symbol goes out. Wait to run a programme until the dishwasher is full, this way you save energy. Use the Rinse & Hold programme to rinse the dishes if there are any unpleasant odours while you wait for the Setting the rinse aid dosage dishwasher to become fully loaded. -
Page 8: Programme Selector
The appearance of the baskets may differ depending on the dishwasher setup. Upper basket Place glasses, cups, bowls, side plates and saucers in the upper basket. All dirty surfaces should face inwards and downwards! Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right (if fitted). -
Page 9: Using The Dishwasher
Using the dishwasher Cutlery basket with lid Add detergent Positioning of cutlery basket lid (in upper basket) The cutlery basket lid can be removed and used, for example, as an extra cutlery basket in the upper basket (see below). 1 Prewash detergent compartment 2 Main wash detergent compartment Detergent is added according to water hardness. -
Page 10: Display
On/Left-on mode Upper half Press and hold the On/Left-on mode button until the display lights You can use this programme if you only have cups and glasses that need washing in the upper basket. Slightly dirty dishes can also be placed in the lower basket. Programme selection Press the Programme selector one or more times until the desired programme symbol appears on the display. - Page 11 2 Press Start/Stop and the dishwasher counts down 1 hour at Stopping or changing a programme a time and starts after the selected delay. If you want to change programme after starting the dishwasher, Press and hold Start/Stop for three seconds if you want to cancel open the door then press and hold Start/Stop for three seconds.
-
Page 12: Settings
Settings Do as follows to open the settings menu: First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the button. Press and hold the On/Left-on mode button until the display lights up. Within five seconds, press and hold the Programme selector and the Long dry button. - Page 13 Button press Options Settings Description Press Start/Stop to save the setting value and continue to the next setting. LCD contrast For adjusting the contrast of the display on the panel. (Low) (High) Press Start/Stop to save the setting value and continue to the next setting. Rinse aid Rinse aid dosage setting.
- Page 14 Button press Options Settings Description Adjusting the water softener. Read off the appropriate Water hardness (Soft water) setting from the water hardness table below. °dH °fH 10-14 9-11 15-20 12-14 21-25 15-19 26-34 20-24 35-43 25-29 44-52 (Hard water) 30-39 53-70 40-49 71-88...
-
Page 15: Care And Cleaning
Care and cleaning Coarse filter NOTE! The coarse filter traps larger food particles, which cannot get The dishwasher must not be used without the filters in place! past the drainage pump. Empty the coarse filter as necessary. Dishwashing results may be affected if the coarse filter is 1 Lift the coarse filter by the handle. - Page 16 Door When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary). WARNING! Do not use a spray bottle or the like around the door lock. This is to ensure that water does not penetrate the door catch and come into contact with the electrical components.
-
Page 17: Troubleshooting
Troubleshooting Display Type of fault Action Overfilling Call the service division. Water outlet fault See "Water remains in the dishwasher" in the table below. Water inlet fault Check that the water tap is on. Inlet valve leakage Turn off the water tap and call the service division. Turn off the machine with the On/Left-on mode button and then turn it on again to clear the error message from the display. - Page 18 Problem Possible causes Action Spots on stainless steel or silver. Some foodstuffs, such as mustard, Rinse off these types of foodstuffs if not mayonnaise, lemon, vinegar, salt and starting the dishwasher immediately. Why dressings, can mark stainless steel if left for not use the Rinse &...
- Page 19 Problem Possible causes Action The dishes are not dry enough. Drying power too low. Activate the Long dry option. The dishwasher is not fully loaded. Fully load the dishwasher. Rinse aid needs topping up or dosage is set Top up with rinse add or increase the rinse too low.
-
Page 20: Information For Test Institute
Information for test institute Energy labelling European test standard: EN 60436 Number of standard place settings: Dishwashing programmes: Eco wash, High temperature Connection: Cold water 15 °C Dosages during testing Detergent: In accordance with EN 60436 Rinse aid: In accordance with EN 60436 Prewash: 7.5 gram Rinse aid dosage:... -
Page 21: Technical Information
Technical information Information on energy labelling Information sheet, in compliance with Commission Delegated Regulation (EU) No. 1059/2010 ATAG Model designation: VA98211QT Number of standard place settings: Energy efficiency class: A+++ Annual energy consumption(AE 233 kWh per year Energy consumption of the standard cleaning cycle(E 0.82 kWh... -
Page 22: Installation
Installation 1238 [mm] 30-94 *Remove locking nuts for an installed height of 860-861 mm. **Door length. It is important that you read through and follow the instructions Make sure the area on which the dishwasher is to be installed and directions below. Conduct installation and connection in is firm. -
Page 23: Service
Service Once the installation is complete, the stopcock should be opened Read chapter Troubleshooting before contacting the service to allow the pressure to settle for a while and to check that all department. Note down the details on the rating plate positioned connections are tight. -
Page 24: Programme Chart
Programme chart... -
Page 25: Your Notes
Your notes... - Page 26 Quick guide Load the baskets (See page 5.) Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher. Check that the spray arms can rotate freely Check also that the water tap is on. Add detergent The detergent compartment has one smaller compartment for the prewash and one for the main wash.
- Page 28 en (09-15)