Table of Contents
Advertisement
en
Adding rinse aid
Rinse aid is used in the rinsing cycle to
ensure clear glasses and stain-free
utensils.
Open the lid of the rinse-aid dispenser
by pressing the button on the
29
rinse-aid lid and lifting up the lid.
Pour the rinse-aid into the filler hole
until the level indicator turns dark.
Close the lid, ensuring that you hear it
snap closed.
rinse–aid control
Note
Use only rinse aid for domestic
dishwashers. Spilt rinse aid
may result in excessive foam
formation in the next rinse
cycle. Therefore, remove any
spilt rinse aid with a cloth.
8
Convenient rinse-aid filling
procedure with half-open door
Open the rinse-aid lid and pull out the
hinged filling aid until it locks into
position.
Slowly fill with rinse aid but do not
overfill.
Close the rinse-aid lid until it clicks shut.
Set Amount of Rinse Aid
The amount of rinse aid is set at the
factory to 4.
Only change this setting if streaks
water stains
remain on the dishes.
Hold the Programme button
press the main switch
Release both buttons.
In order to change the setting, press the
Programme button
Each time you press the button the
value increases by one step; once
a value of
is reached the indicator
jumps back to
fill indicator
does not show a need
6
to refill).
Switch off the main switch
value is stored within the device.
Note
Only switch off the rinse
aid indicator if you are
using cleaning products
with integrated rinse aid!
or
and
3
.
1
.
3
(Off: The rinse aid
. The set
1
Advertisement
Table of Contents
