Table of Contents
Advertisement
Chapter 2, Set Up a Call
Setting up a Call
4. Enter the Mobile Station's preferred system (SID).
1. Press then release the blue SHIFT key, then
press the CDMA SCRNS - CALL CTRL key to
select the CDMA CELL SITE
CONFIGURATION screen.
2. Select the System ID field.
3. Enter the mobile station's preferred system
identification.
4. Press the PREV key to return to the CDMA
CALL CONTROL screen.
System ID is programmed into the mobile station by the service providers. When power is turned on, the
mobile station searches for CDMA signals. When the CDMA signal is demodulated, the mobile station
finds out whether or not the Test Set's system matches the system it is programmed to prefer service on.
Depending on how the mobile station is programmed, entering an incorrect number in this field could
cause the mobile station to delay any call-processing until it has exhausted a search of other RF channels,
or it may not allow any calls at all.
46
CDMA CELL SITE CONFIGURATION
System ID
384
Advertisement
Table of Contents
