Maintenance; Service Information - Stanley STSS025-B9 Manual

ENGLISH
• Press the rear paper clamp lever (5) downwards and
locate it in the retaining groove.
Fitting and removing the dustbag (FIG. D)
• Fit the dustbag (2) over the dust extraction outlet (3).
• Slide the dustbag (2) onto the tool and make sure that it
is securely located.
• To remove the dustbag (2), pull it to the rear and off the
outlet.
USE
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off (FIG. E)
• To switch the tool on, press the part of the on/off switch
(1) marked 'I'.
• To switch the tool off, press the part of the on/off switch
(1) marked '0'.
Emptying the dustbag
• The dustbag (2) should be emptied every 10 minutes.
• Shake the dustbag (2) to empty the contents
Hints for optimum use
• Do not place your hands over the ventilation slots.
• Do not exert too much pressure on the tool.
• Regularly check the condition of the sanding sheet.
Replace when necessary.
• Always sand with the grain of the wood.
• When sanding new layers of paint before applying
another layer, use extra fine grit.
• On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to a
fine grit for a smooth finish.
• Consult your retailer for more information on available
accessories.
6
(Original instructions)

Maintenance

Your STANLEY tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft dry brush or dry cloth.
• Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based cleaner.

Service Information

STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.