Supplied Accessories - Lectrosonics IFBT4/X Instruction Manual

Supplied Accessories

DCR12/A5U
AC power supply for IFBT4 transmitters; 100-240
V, 50/60 Hz, 0.3 A input, 12 VDC regulated output;
7-foot cord with LZR threaded locking plug and in-
terchangeable blades/posts for use in Europe, UK,
Australia and USA (sold separately).
21586
DC16A Pigtail power cable, LZR stripped & tinned.
CMINI
A soft sided, padded and zippered carrying case for
compact wireless systems
VSR1
Velcro cable strain relief. One piece mounts to re-
ceiver and the cable is held between that piece and
a mating cover piece.
35679
Lectrosonics screwdriver and adjustment tool for
setting transmitter gain and roll-off pots as well as
for setting the frequency switches on some older
receivers and transmitters.
A500RAxx
UHF antenna, right angle BNC. Specify block such
as A500RA-24 for block 24. These antennas can
be used one block above and below the specified
block. Color coded tip per ANSI resistor code.See
page 13 for specification information.
Rio Rancho, NM
Multi-Frequency IFB Transmitter
DCR12/A5U
21586 Locking collar with
5/16"-32 thread
Locking collar with
5/16"-32 thread
VSR1
11