Table of Contents
Advertisement
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
M
N a MbN: "Erase All" a MOKN
4
MbN: "Yes" a MOKN
5
MbN: "Yes" a MOKN a M
Other programming
Changing the handset name
The default handset name is "Handset 1" to
"Handset 2". You can customise the name
of each handset ("Bob", "Kitchen", etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 23).
1
M
N#104
2
Enter the desired name (10 characters
max.). a MOKN a M
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
M
N#105
2
MbN: Select the desired setting. a MOKN
a M
N
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 25) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
"123". If you make a call from the caller list to
the phone number "123-456-7890", the unit
dials "456-7890".
1
M
N#255
0906_TGC41xCX (en)_ver002.pdf 23
2
Enter an area code (5 digits max.). a
MOKNa M
Call restriction
N
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
2
Enter the base unit PIN (default: "0000").
R If you forget your PIN, contact an
3
MbN: Select the handsets to be restricted.
a M N
R " " is displayed next to the selected
R To cancel the selected handsets:
N
4
MOKN
5
MbN: Select a memory location. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
M
Changing the base unit PIN
Important:
R If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
2
Enter the current 4-digit base unit PIN
(default: "0000").
3
Enter the new 4-digit base unit PIN. a
MOKN
4
MbN: "Yes" a MOKN a M
Programming
N
N#256
authorised service centre.
handset numbers.
MbN: Select the handset. a Press M N
again. " " disappears.
N
N#132
6/9/2016 3:19:58 PM
N
23
Advertisement
Table of Contents
