Biostar iDEQ 200T Bios Setup Manual page 22

Biostar ideq 200t: supplementary guide
Hide thumbs Also See for iDEQ 200T:
Table of Contents

Advertisement

P4TBA BIOS Setup
Min. Power Saving
Minimum power management.
Suspend Mode = 1 hr.
HDD Power Down = 15 min
Max. Power Saving
Maximum power management only available for sl CPU's.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Defined (default)
Allows you to set each mode individually.
When not disabled, each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disable.
Video Off Method
This option determines the manner in which the monitor is goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Video Off In Suspend
This determines the manner in which the monitor is blanked.
The Choices: Yes (default), No.
Suspend Type
The item allows you to select the Suspend Type.
The Choices: Stop Grant (default), Power on Suspend
MODEM Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: 3 (default), NA, 4, 5, 7, 9, 10, 11
Suspend Mode
(default)
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideq 200tbP4tba

Table of Contents