Biostar iDEQ 200T Bios Setup Manual page 15

P4TBA BIOS Setup
of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
The Choices: 128M (default), 4, 8, 16, 32, 64, 256.
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: Onboard/AGP (default), PCI Slot.
On-Chip VGA
This item allows you to enable or disable the On-Chip VGA.
The Choices: Enabled (default), Disabled
On-Chip Frame Buffer Size
This item allows you to select the Frame Buffer Size.
The Choices: 16MB (Default), 1MB, 4MB, 8MB, 32MB.
Boot Display
This item allows you to select the Boot Display.
The Choices: Auto (Default), CRT, TV, EFP.
14