Biostar iDEQ 200T Bios Setup Manual page 14

P4TBA BIOS Setup
DRAM RAS# to CAS# Delay
This field allows you to insert a timing delay between the CAS and RAS strobe signals,
used when DRAM is written to, read from, or refreshed. Fast gives faster performance; and
slow gives more stable performance. This field applies only when synchronous DRAM is
installed in the system.
The Choices: 4 (Default), 3, 2.
DRAM RAS# Precharge
If an insufficient number of cycle is allowed for RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete, and the DRAM may fail to retain data. Fast
gives faster performance; and Slow gives more stable performance. This field applies only
when synchronous DRAM is installed in the system.
The Choices: 4 (Default), 3, 2.
Memory Frequency For
Select "Auto" for best performance.
The Choices: Auto (Default), DDR266, DDR333, DDR320, DDR400.
System BIOS Cacheable
Selecting Enabled allows you caching of the system BIOS ROM at F0000h~FFFFFh,
resulting a better system performance. However, if any program writes to this memory area,
a system error may result.
The Choices: Enabled (default), Disabled.
Video BIOS Cacheable
Select Enabled allows caching of the video BIOS, resulting a better system performance.
However, if any program writes to this memory area, a system error may result.
The Choices: Enabled (default), Disabled.
Memory Hole at 15M-16M
You can reserve this area of system memory for ISA adapter ROM. When this area is
reserved it cannot be cached. The user information of peripherals that need to use this area of
system memory usually2 discussed their memory requirements.
The Choices: Disabled (default), enabled.
Delay Prior to Thermal
Set this item to enable the CPU Thermal function to engage after the specified time.
The Choices: 16 min. (Default), 4, 8, 32.
AGP Aperture Size (MB)
Select the size of the Accelerated Graphics Port (AGP) aperture. The apertures is a portion
13