Biostar iDEQ 220K Bios Setup Manual
  1. Manuals
  2. Brands
  3. Biostar Manuals
  4. Motherboard
  5. IDEQ 220K
  6. Bios setup manual
Biostar iDEQ 220K Bios Setup Manual

Biostar iDEQ 220K Bios Setup Manual

Biostar ideq 220k: supplementary guide
Hide thumbs Also See for iDEQ 220K:

Advertisement

Table of Contents

See also: User Manual
K8VBK-S7 BIOS Setup
BIOS Setup .......................................................................................1
1 Main Menu ................................................................................................... 3
2 Standard CMOS Features ............................................................................. 6
3 Advanced BIOS Features ............................................................................. 9
4 Advanced Chipset Features ........................................................................ 16
5 Integrated Peripherals ................................................................................. 22
6 Power Management Setup .......................................................................... 29
7 PnP/PCI Configurations.............................................................................. 35
8 PC Health Status ......................................................................................... 38
9Voltage Control ........................................................................................... 40
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iDEQ 220K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Biostar iDEQ 220K

Summary of Contents for Biostar iDEQ 220K

  • Page 1: Table Of Contents

    K8VBK-S7 BIOS Setup BIOS Setup ...1 1 Main Menu ... 3 2 Standard CMOS Features ... 6 3 Advanced BIOS Features ... 9 4 Advanced Chipset Features ... 16 5 Integrated Peripherals ... 22 6 Power Management Setup ... 29 7 PnP/PCI Configurations...

  • Page 2: Bios Setup

    K8VBK-S7 BIOS Setup BIOS Setup Introduction This manual discussed Award™ Setup program built into the ROM BIOS. The Setup program allows users to modify the basic system configuration. This special information is then stored in battery-backed RAM so that it retains the Setup information when the power is turned off.
  • Page 3 K8VBK-S7 BIOS Setup PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR SDRAM (Double Data Rate Synchronous DRAM) are supported. Supported CPUs This AWARD BIOS supports the AMD CPU. Using Setup In general, you use the arrow keys to highlight items, press <Enter>...

  • Page 4: Main Menu

    K8VBK-S7 BIOS Setup 1 Main Menu Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu. !! WARNING !! The information about BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS...
  • Page 5 K8VBK-S7 BIOS Setup Power Management Setup This submenu allows you to configure the power management features. PnP/PCI Configurations This submenu allows you to configure certain “Plug and Play” and PCI options. PC Health Status This submenu allows you to monitor the hardware of your system. Frequency/ Voltage Control This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.
  • Page 6 K8VBK-S7 BIOS Setup Set User Password If the Supervisor Password is not set, then the User Password will function in the same way as the Supervisor Password. If the Supervisor Password is set and the User Password is set, the “User” will only be able to view configurations but will not be able to change them. Save &...

  • Page 7: Standard Cmos Features

    K8VBK-S7 BIOS Setup 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the<PgUp> or <PgDn> keys to select the value you want in each item. Figure 2.
  • Page 8 K8VBK-S7 BIOS Setup Main Menu Selections This table shows the selections that you can make on the Main Menu. Item Options Date mm : dd : yy Time hh : mm : ss IDE Primary Master Options are in its sub menu.
  • Page 9 K8VBK-S7 BIOS Setup Item Options Halt On All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/ Key Base Memory Extended Memory Total Memory Description Select the situation in which you want the BIOS to stop the POST process and notify you.

  • Page 10: Advanced Bios Features

    K8VBK-S7 BIOS Setup 3 Advanced BIOS Features Figure 3. Advanced BIOS Setup 3.1 Boot Seq & Floppy Setup...
  • Page 11 K8VBK-S7 BIOS Setup 3.1.1 Hard Disk Boot Priority These BIOS attempt to load the operating system from the device in the sequence selected in these items. The Choices: Pri. Master, Pri.Slave, Sec.Master, Sec. Slave, USBHDD0, USBHDD1, USBHDD2 and Bootable Add-in Carde.
  • Page 12 K8VBK-S7 BIOS Setup 3.1.2 First/ Second/ Third/ Boot Other Device These BIOS attempt to load the operating system from the devices in the sequence selected in these items. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled. 3.1.3 Swap Floppy Drive For systems with two floppy drives, this option allows you to swap logical drive assignments.
  • Page 13 K8VBK-S7 BIOS Setup 3.2 Shadow Setup This item allows you to setup cache & shadow setup. Video BIOS Shadow Determines whether video BIOS will be copied to RAM for faster execution. Enabled (default) Disabled Optional ROM is enabled. Optional ROM is disabled..
  • Page 14 K8VBK-S7 BIOS Setup 3.3 Cache Setup 3.3.1 CPU Internal Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache. 3.3.2 External Cache This option enables or disables “Level 2” secondary cache on the CPU, which may improve performance.
  • Page 15 K8VBK-S7 BIOS Setup 3.4 Virus Warning This option allows you to choose the Virus Warning feature that is used to protect the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep.
  • Page 16 K8VBK-S7 BIOS Setup 3.11 APIC MODE Selecting Enabled enables ACPI device mode reporting from the BIOS to the operating system. The Choices: Enabled (default), Disabled. 3.12 MPS VERSION CONTROL FOR OS The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.

  • Page 17: Advanced Chipset Features

    K8VBK-S7 BIOS Setup 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus. The default settings that came with your system have been optimized and therefore should not be changed unless you are suspicious that the settings have been changed incorrectly.
  • Page 18 K8VBK-S7 BIOS Setup 4.1 AGP & P2P BRIDGE CONTROL 4.1.1 AGP Aperture Size Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a portion of the PCI memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the AGP without any translation.
  • Page 19 K8VBK-S7 BIOS Setup 4.1.5 AGP Fast Write The Choices: Enabled, Disabled (default). 4.1.6 AGP Master 1 WS Write When Enabled, writes to the AGP (Accelerated Graphics Port) are executed with one-wait states. The Choices: Disabled (default), Enabled. The Choices: 4X (default), 2X, 1X. 4.1.7 AGP Master 1 WS Read When Enabled, read to the AGP (Accelerated Graphics Port) are...
  • Page 20 K8VBK-S7 BIOS Setup 4.2 DRAM CONFIGURATION 4.2.1 Max Memclock (MHz) Places an artifical memory clock limit on the system. Memory is prevented from running faster than this frequency. The Choices: 200 (Default), 166, 133, and 100. 4.2.2 CAS# Latency This field specify the cas# latency, i.e. cas# to read data valid. The Choices: CL=2.5 (Default), CL=3.0, CL=2.0 4.2.3 RAS# to CAS# Delay (tRCD)
  • Page 21 K8VBK-S7 BIOS Setup 4.3 LDT & PCI BUS CONTROL If you highlight the literal “Press Enter” next to the “LDT & PCI Bus Control” label and then press the enter key, it will take you a submenu with the following options: 4.3.1 Upstream LDT Bus Width The Choices: 8 bit, 16 bit (Default).
  • Page 22 K8VBK-S7 BIOS Setup MEMORY HOLE You can reserve this area of system memory for ISA adapter ROM. When this area is reserved it cannot be cached. The user information of peripherals that need to use this area of system memory usually2 discussed their memory requirements.

  • Page 23: Integrated Peripherals

    K8VBK-S7 BIOS Setup 5 Integrated Peripherals Figure 5. Integrated Peripherals...
  • Page 24 K8VBK-S7 BIOS Setup 5.1VIA OnChip IDE Device If you highlight the literal “Press Enter” next to the “VIA OnChip IDE Device” label and then press the enter key, it will take you a submenu with the following options: 5.1.1 OnChip SATA This option allows you to enable the onchip Serial ATA.
  • Page 25 K8VBK-S7 BIOS Setup 5.1.5 Primary / Secondary /Master / Slave PIO The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4 will increase performance progressively. In Auto mode, the system automatically determines the best mode for each device.
  • Page 26 K8VBK-S7 BIOS Setup 5.2 VIA OnChip PCI Device If you highlight the literal “Press Enter” next to the “ press the enter key, it will take you a submenu with the following options: 5.2.1 VIA-3058 AC97 Audio This option allows you to control the onboard AC97 audio. The Choices: Auto (default), Disabled.
  • Page 27 K8VBK-S7 BIOS Setup 5.3 Super IO Device If you highlight the literal “Press Enter” next to the “ press the enter key, it will take you a submenu with the following options: 5.3.1 Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it.
  • Page 28 K8VBK-S7 BIOS Setup 5.3.5 UR2 Duplex Mode Select the value required by the IR device connected to the IR port. Full-duplex mode permits simultaneous two-direction transmission. Half-duplex mode permits transmission in one direction only at a time. The Choices: Half (default), Full. 5.3.6 Onboard Parallel Port This item allows you to determine access onboard parallel port controller with which...
  • Page 29 K8VBK-S7 BIOS Setup Onboard 1394 chip This item allows you to enable or disable the Onboard 1394 Chip. The Choices: Enabled (default), Disabled. Onboard LAN Device This item allows you to enable or disable the Onboard LAN Device The Choices: Enabled (default), Disabled. Onboard LAN Boot Rom This item allows you to enable or disable the Onboard Boot Rom.

  • Page 30: Power Management Setup

    K8VBK-S7 BIOS Setup 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6. Power Management Setup 6.1 ACPI function This item displays the status of the Advanced Configuration and Power Management (ACPI).
  • Page 31 K8VBK-S7 BIOS Setup Max. Power Saving Maximum power management only available for sl CPU’s. Suspend Mode = 1 min. HDD Power Down = 1 min. User Define (default) Allows you to set each mode individually. When not disabled, each of the ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min.
  • Page 32 K8VBK-S7 BIOS Setup 6.8 Modem Use IRQ This determines the IRQ, which can be applied in MODEM use. The Choices: 3 (default),4 / 5 / 7 / 9 / 10 / 11 / NA. 6.9 Soft-Off by PWR-BTTN Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state when the system has “hung.”...
  • Page 33 K8VBK-S7 BIOS Setup 6.12 IRQ/Event Activity Detect If you highlight the literal “Press Enter” next to the “IRQ/Event ActivityDetect” label and then press the enter key, it will take you a submenu withthe following options: 6.12.1 PS2KB Wakeup Select When select Password, please press Enter key to change password with a maximum of 8 characters.
  • Page 34 K8VBK-S7 BIOS Setup 6.12.6 HDD & FDD When this option is set to On, any event occurring on a hard drive or a floppy drive will awaken a system which has been powered down. The Choices: On (default), Off. 6.12.7 PCI Master When set to On, you need a LAN add-on card which supports the power function.
  • Page 35 K8VBK-S7 BIOS Setup 6.12.13 IRQs Activity Monitoring Press Enter to access another sub menu used to configure the different wake up events (i.e. wake on LPT & COMM activity). Primary INTR IRQ3 (COM2) IRQ4 (COM1) IRQ5 (LPT2) IRQ6 (Floppy Disk) IRQ7 (LPT1) IRQ8 (RTC Alarm) IRQ9 (IRQ2 Redir)

  • Page 36: Pnp/Pci Configurations

    K8VBK-S7 BIOS Setup 7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
  • Page 37 K8VBK-S7 BIOS Setup Legacy is the term, which signifies that a resource is assigned to the ISA Bus and provides non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is assigned to the PCI Bus or provides for ISA PnP add-on cards and peripherals. The Choices: Disabled (default), Enabled.
  • Page 38 K8VBK-S7 BIOS Setup 7.6 Assign IRQ For VGA This item allows the users to choose which IRQ to assign for the VGA. The Choices: Enabled (default), Disabled. 7.7 Assign IRQ For USB This item allows the users to choose which IRQ to assign for the USB. The Choices: Enabled (default), Disabled.

  • Page 39: Pc Health Status

    K8VBK-S7 BIOS Setup 8 PC Health Status Figure 8. PC Health Status 8.1 CPU FAN Control The Choice mart? Can make your CPU FAN to reduce noise. The Choices:SMART(default),always on. 8.2 SYS FAN Control The Choice mart? Can make your SYS FAN to reduce noise. The Choices:SMART(default),always on.
  • Page 40 K8VBK-S7 BIOS Setup CPU FAN Speed This field displays the current speed of CPU fan. SYS FAN Speed This field displays the current speed SYSTEM fan. 8.8 Show H/W Monitor in POST If your computer contains a monitoring system, it will show PC health status during POST stage.

  • Page 41: 9Voltage Control

    K8VBK-S7 BIOS Setup 9 Voltage Control Figure 9. Frequency/ Voltage Control AUTO DETECT PCI CLK This item allows you to enable / disable auto Detect PCI Clock. The Choices: Enabled (default), Disabled. SPREAD SPECTRUM This item allows you to enable\disable the spread spectrum function. The choices:Enabled (default), Disabled.
  • Page 42 K8VBK-S7 BIOS Setup 12/1/2004...

This manual is also suitable for:

K8vbk-s7

Table of Contents