Biostar iDEQ 200T Bios Setup Manual page 11

P4TBA BIOS Setup
The Choices: Disabled (default), Enabled.
Report No. FDD for WIN 95
The Choices: No (default), Yes.
Cache Setup
CPU L1 & L2 Cache
This option helps you to enable or disable "Level 1" or "Level 2" cache on the
CPU, which may improve performance.
The Choices: Enabled (default), Disabled
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect the IDE
Hard Disk boot sector. If this function is enabled and an attempt is made to write to the
boot sector, BIOS will display a warning message on the screen and sound an alarm beep.
Disabled (default)
Enabled
Hyper-Threading Technology
"Enabled" for Windows XP and Linux 2.4.x (OS optimized for Hyper-Threading
Technology), and "Disabled" for other OS (OS not optimized for Hyper-Threading
Technology.)
The Choices: Enabled (default), Disabled
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test (POST) to
execute after you power up the computer.
Enabled (default)
Disabled
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Typematic Rate Setting
Virus protection is disabled.
Virus protection is activated.
Enable quick POST.
Normal POST.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller
controls Gate A20.
Lets chipset control Gate A20.
10