Setting Up A Wsd Port (Windows 7/Windows Vista) - Epson ET-5180 User Manual

You see a screen like this:
Note: You must register your product with Epson Connect to select a destination.
5. Press the OK button to select a destination.
6. Change any of the displayed settings on the Scan tab as necessary.
7. Select the Advanced Settings tab to view and change additional scan settings, if necessary.
8. On the Scan tab, select
Your product scans your original and saves the scanned file to the selected destination.
Parent topic:

Setting Up a WSD Port (Windows 7/Windows Vista)

You can scan to a networked Windows computer using WSD (Web Services for Devices). You must first
set up a WSD port on your Windows 7 or Windows Vista system (the port is set up automatically on
Windows 10 and Windows 8.x).
Before you set up a WSD port, make sure you installed your product software, and connected your
product and computer to the same network.
1. Turn on your product.
2. Print a network status sheet so you can identify the network name and model name for your product
on the network.
3. Click or Start and select Computer.
Upload to start scanning.
Starting a Scan
177