Table of Contents
Advertisement
FCC COMPLIANCE STATEMENT
CAUTION: Changes or modifications not expressly approved by Digital Security
Controls Ltd. could void your authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed
and used properly, in strict accordance with the manufacturer's instructions, may
cause interference to radio and television reception. It has been type tested and
found to comply with the limits for Class B device in accordance with the
specifications in Subpart "B" of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in any residential
installation. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to television or
radio reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Re-orient the receiving antenna
•
Relocate the alarm control with respect to the receiver
Move the alarm control away from the receiver
•
•
Connect the alarm control into a different outlet so that alarm control
and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/
television technician for additional suggestions. The user may find the
following booklet prepared by the FCC helpful: "How to Identify and
Resolve Radio/Television Interference Problems." This booklet is
available from the U.S. Government Printing Office, Washington, D.C.
20402, Stock # 004-000-00345-4.
IMPORTANT INFORMATION
FCC Registration Number: F53CAN-24626-MF-E
AC REN: 1.4B
DC REN: 1.2
USOC Jack: RJ11C
Authorized Network Ports: 02LS2
MALFUNCTION OF THE EQUIPMENT In the event that this equipment should
fail to operate properly, the customer shall disconnect the equipment from the
telephone line to determine if it is the customer's equipment which is not working
properly, or if the problem is with the telephone company network. If the problem is
with this equipment, the customer shall discontinue use until it is repaired.
Service Order Code: 9.0F
TELEPHONE CONNECTION REQUIREMENTS Except for the telephone
company provided ringers, all connections to the telephone network shall be
made through standard plugs and telephone company provided jacks, or
equivalent, in such a manner as to allow for easy, immediate disconnection of the
terminal equipment. Standard jacks shall be so arranged that, if the plug
connected there is withdrawn, no interference to the operation of the equipment
at the customer's premises which remains connected to the telephone network shall
occur by reason of such withdrawal.
INCIDENCE OF HARM Should terminal equipment or protective circuitry
cause harm to the telephone network, the telephone company shall, where
practicable, notify the customer that temporary disconnection of service may be
required; however, where prior notice is not practicable, the telephone company
may temporary discontinue service if such action is deemed reasonable in the
circumstances. In the case of such temporary discontinuance, the telephone
company shall promptly notify the customer and will be given the opportunity to
correct the situation. The customer also has the right to bring a complaint to the
FCC if he feels the disconnection is not warranted.
CHANGE IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES
The Telephone Company may make changes in its communications facilities,
equipment, operations or procedures, where such actions is reasonably required
and proper in its business. Should any such changes render the customer's
terminal equipment incompatible with the telephone company facilities the
customer shall be given adequate notice to the effect of the modifications to
maintain uninterrupted service.
GENERAL This equipment should not be used on coin telephone lines.
Connection to party line service is subject to state tariffs.
RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine
the quantity of devices that you may connect to your telephone line and still have all
of those devices ring when your telephone number is called. In most, but not all
areas, the sum of the REN's of all devices connected to one line should not exceed
five (5). To be certain of the number of devices that you may connect to your line,
you may want to contact your local telephone company.
EQUIPMENT MAINTENANCE FACILITY
Digital Security Controls Ltd. 160 Washburn St.Lockport, NY 14094
Advertisement
Table of Contents
