Power Connector - HP 17 Laptop PC Maintenance And Service Manual

Power connector

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the fan/heat sink (see
8. Remove the display (see
To remove the power connector cable:
▲ Pull the tabs away from the connector and remove the power connector from the computer.
Reverse this procedure to install the power connector cable.
Battery on page 32).
Optical drive on page
Bottom cover on page
Heat sink assembly on page
Display assembly on page
33).
41).
58).
65).
Component replacement procedures
Spare part number
810326-010
77