Ilsco TaskMaster TB-12U1000-P Instruction Manual page 5

Table of Contents

Advertisement

TB-12U1000-P
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use the battery operated accessories in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the tool
for operations different from those intended could result in a hazardous situation.
BATTERY USE AND CARE
Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to
fire or temperature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not charge the battery pack outside the
temperature range specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the battery and increase the
risk of fire.
SERVICE
Have your battery operated tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the battery operated
tool is maintained.
Never service damaged battery packs. Service of battery packs should only be
performed by the manufacturer or authorized service providers.
5

Advertisement

Table of Contents
loading

Table of Contents