Summary of Contents for Ilsco TaskMaster TR-CUT50CU
Page 1
Model: TR-CUT50CU Instruction manual Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Phone: TASKMASTER TOOLS 800-776-9775 4730 Madison Road 513-533-6200 Cincinnati OH 45227 www.ilsco.com...
TR-CUT50CU Table of Contents Warranty and Servicing..............................3 Safety Symbols..................................3 Safety......................................4 Technical Specifications..............................5 Identification..................................6 Operating Instructions...............................7 Tool Maintenance.................................8 Head Assembly Breakdown and Parts List........................9 Tool Parts Breakdown...............................10 Parts List....................................11 Thank you... for buying a TASKMASTER TOOL. Our mission is to bring product innovation and exceptional customer service to the marketplace.
Your first reconditioning is on us! To Find a TASKMASTER PRO Service Partner Call ILSCO for assistance in solving tool performance issues or for any of your service needs. ILSCO tool owners will be offered options to solve any tool replacement, parts or repair issues.
TR-CUT50CU SAFETY Read all safety warnings, instructions provided with this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. •...
TR-CUT50CU TECHNICAL SPECIFICATIONS Force developed: 6.7 tons Jaw Opening: 1.96 in. Dimensions: 12.3 in. x 3.9 in. x 2.5 in. (L x W x H) Weight: 6.4 lbs. Cut Capacity CU conductor: 1.9 in. AL conductor: 1.9 in. 12.3 in. (312 mm)
TR-CUT50CU OPERATING INSTRUCTIONS Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting head. NOTE: Connect head to 10,000 PSI hydraulic pump. CUTTING Make sure the blade is fully retracted. Unlatch the tool head by pulling up on release lever. Close head and latch around material.
TR-CUT50CU TOOL MAINTENANCE Daily maintenance: • After each cutting cycle wipe the cutting head jaws free of metal shavings. • Wipe down all steel parts with WD-40. • Store the tool in a non-humid environment. The head should provide many years of service when given the proper maintenance and care. Should you experience any difficulty with the operation and maintenance of this head, contact our customer service department (see back cover).
TR-CUT50CU HEAD ASSEMBLY BREAKDOWN AND PARTS LIST Part # Part Description Part # Part Description 100269 COMPRESSION SPRING 1 12 710159 CYLINDER HEAD 701401 BLADE GUIDE RIGHT 13 710161 LATERAL PLATE 700883 SCREW 14 701139 HEXAGONAL NUT 701232 FIXED BLADE 15 701406 LOCKING RING 701392 BLADE GUIDE LEFT...