Page 1
Model: TR-CUT45 Instruction manual Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Phone: TASKMASTER TOOLS 800-776-9775 4730 Madison Road 513-533-6200 Cincinnati OH 45227 www.ilsco.com...
TR-CUT45 Table of Contents Warranty and Servicing..............................3 Safety Symbols..................................3 Safety......................................4 Technical Specifications..............................5 Identification..................................6 Operating Instructions...............................7 Tool Maintenance................................8 Head Assembly Breakdown and Parts List......................... 9 Tool Parts Breakdown...............................10 Parts List....................................11 Thank you... for buying a TASKMASTER TOOL. Our mission is to bring product innovation and exceptional customer service to the marketplace.
Your first reconditioning is on us! To Find a TASKMASTER PRO Service Partner Call ILSCO for assistance in solving tool performance issues or for any of your service needs. ILSCO tool owners will be offered options to solve any tool replacement, parts or repair issues.
TR-CUT45 SAFETY Read all safety warnings, instructions provided with this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. •...
TR-CUT45 TECHNICAL SPECIFICATIONS Force developed: 6.7 tons Jaw opening: 1.77 in. Dimensions: 12.3 in. x 3.9 in. x 2.5 in. (L x W x H) Weight: 6.4 lbs Cut Capacity CU conductor: 1.5 in. AL conductor: 1.7 in. ACSR: 1590kcmil Guy wire: 5/8 in.
TR-CUT45 OPERATING INSTRUCTIONS Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting head. NOTE: Connect head to 10,000 PSI hydraulic pump. CUTTING Make sure the blade is fully retracted. Pull head locking pin to open head. Close head and secure locking pin in place.
TR-CUT45 TOOL MAINTENANCE Daily maintenance: • After each cutting cycle wipe the cutting head jaws free of metal shavings. • Wipe down all steel parts with WD-40. • Store the tool in a non-humid environment. The head should provide many years of service when given the proper maintenance and care. Should you experience any difficulty with the operation and maintenance of this tool, contact our customer service department (see back cover).
TR-CUT45 HEAD ASSEMBLY BREAKDOWN AND PARTS LIST Part # Part Description 703031 BLADE GUIDE LEFT 703030 BLADE GUIDE RIGHT 701016 BUSHING 703033 UPPER BLADE HOLDER 1 701470 FIXED BLADE 703032 PLATE 701024 CAP SCREW 100290 BALL 101174 COMPRESSION SPRING 1 10 702283 MOVING BLADE 11 705806 FILTER DISC 12 707880 HEAD FORK...