Summary of Contents for Ilsco TaskMaster TR-CUT-85CU
Page 1
Model: TR-CUT-85CU Instruction manual Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Phone: TASKMASTER TOOLS 800-776-9775 4730 Madison Road 513-533-6200 Cincinnati OH 45227 www.ilsco.com...
TR-CUT-85CU Table of Contents Warranty and Servicing..............................3 Safety Symbols..................................3 Safety......................................4 Technical Specifications..............................5 Identification..................................6 Operating Instructions...............................7 Tool Maintenance.................................8 Head Assembly Breakdown and Parts List........................9 Tool Parts Breakdown...............................10 Parts List....................................11 Thank you... for buying a TASKMASTER TOOL. Our mission is to bring product innovation and exceptional customer service to the marketplace.
Your first reconditioning is on us! To Find a TASKMASTER PRO Service Partner Call ILSCO for assistance in solving tool performance issues or for any of your service needs. ILSCO tool owners will be offered options to solve any tool replacement, parts or repair issues.
TR-CUT-85CU SAFETY Read all safety warnings, instructions provided with this tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. •...
TR-CUT-85CU TECHNICAL SPECIFICATIONS Force developed: 7.8 tons Jaw Opening: 3.34 in. Dimensions: 15.3 in. x 5.3 in. x 2.9 in. (L x W x H) Weight: 8.8 lbs. Cut Capacity CU code wire: 3.3 in. AL code wire: 3.3 in. 12.3 in.
TR-CUT-85CU OPERATING INSTRUCTIONS Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting head. NOTE: Connect tool to 10,000 PSI hydraulic pump. CUTTING Make sure the blade is fully retracted. Unlatch the tool head by pressing down on release lever. Close head and latch around material.
TR-CUT-85CU TOOL MAINTENANCE Daily maintenance: • After each cutting cycle wipe the cutting head jaws free of metal shavings. • Wipe down all steel parts with WD-40. • Store the tool in a non-humid environment. The tool should provide many years of service when given the proper maintenance and care. Should you experience any difficulty with the operation and maintenance of this tool, contact our customer service department (see back cover).
TR-CUT-85CU HEAD ASSEMBLY BREAKDOWN AND PARTS LIST Part # Part Description Part # Part Description 706097 FIT SCREW 13 706103 SUPPORTING ROLL 706095 PRESSURE PIN 14 705806 FILTER DISC 101809 ROLL PIN 15 706091 CYLINDER HEAD 706001 COMPRESSION SPRING 1 16 706098 CYLINDRICAL PIN 700615...