Table of Contents
Advertisement
Model Number
443B102
Performance
Sensor Input Type(s)
Voltage Gain Increment
Accuracy(ICP®/ Voltage Input)
Accuracy(Charge Input)
Sensitivity(ICP®/Voltage)
Sensitivity(Charge Input)
Input Range(maximum)(Charge Input)
Low Frequency Response(-10 %)
Low Frequency
Response(-10 %)
Low Frequency
Response(10 %)(Velocity)
Low Frequency
Response(10 %)(Velocity)
Low Frequency
Response(10 %)(Displacement)
Low Frequency
Response(10 %)(Displacement)
High Frequency Response(-10 %)
Filter Type(4-pole Butterworth)
Electrical Filter Roll-off
High Frequency Response(-10 %)
High Frequency
Response(-10 %)
High Frequency
Response(-10 %)
High Frequency
Response(-10 %)
High Frequency
Response(-10 %)
High Frequency
Response(-10 %)
Fault/Bias Monitor LEDS
Drift
Control Interface
Human Interface
Display
Digital Control Interface
Digital Control: Data Rate
Digital Control: Start, Data, Stop, Parity
Environmental
Temperature Range(Operating)
Electrical
Power Required(VDC)
Power
Required(VDC)
Power
Required(Watts)
Power
Required(VDC)
Excitation Voltage(To Sensor)
DC Offset
Constant Current Excitation(to Sensor, Selectable)
Output Voltage
Output Impedance
Broadband Electrical Noise(1 Hz to 10 kHz)(ICP® INPUT)
Broadband Electrical
Noise(2 to 22.4 kHz)(ICP® INPUT)
Spectral Noise(1 Hz)
Spectral
Noise(10 Hz)
Spectral
Noise(100 Hz)
Spectral
Noise(1 kHz)
Spectral
Noise(10 kHz)
Broadband Electrical Noise(1 Hz to 10 kHz)(Charge Input)
Broadband Electrical
Noise(2 Hz to 22.4 kHz)(Charge Input)
Spectral Noise(1 kHz)
Spectral
Noise(10 kHz)
Spectral
Noise(100 kHz)
Spectral
Noise(1 kHz)
Spectral
Noise(10 kHz)
Oscillator(pC RMS)
Oscillator(V RMS)
Oscillator(Hz)
Time Constant(Long TC Mode)
Time
Constant(Med TC Mode)
Overload Threshold
Physical
Electrical Connector(Input, sensor)
Electrical
Connector(Output)
Electrical
Connector(Ext Zero)
Size (Height)
Weight
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
®
ICP
is a registered trademark of PCB Group, Inc.
MODULAR SERIES POWER SUPPLY
ENGLISH
SI
ICP®, Charge
ICP®, Charge
Optional versions have identical specifications and accessories as listed for the standard model
0.1-1000
0.1-1000
± 0.5 %
± 0.5 %
± 0.5 %
± 0.5 %
[11]
.001 to 9.999 mV/unit
.001 to 9.999 mV/unit
0.0001 to 10 V/pC
0.0001 to 10 V/pC
[12]
100,000 pC
100,000 pC
2.0 Hz ±20 %
2.0 Hz ±20 %
0.2 Hz ±20 %
0.2 Hz ±20 %
1.0 Hz ±5 %
1.0 Hz ±5 %
10 Hz ±5 %
10 Hz ±5 %
1.0 Hz ±5 %
1.0 Hz ±5 %
10 Hz ±5 %
10 Hz ±5 %
200 kHz ±5 %
200 kHz ±5 %
Low Pass
Low Pass
80 dB/decade
80 dB/decade
0.1 kHz ±5 %
0.1 kHz ±5 %
NOTES:
1.0 kHz ±5 %
1.0 kHz ±5 %
[1] Must be used with PCB 440 series mainframe chassis with computer control (RS-232).
[2] Maximum number of 443B102 Dual Mode Signal Conditioners that can be powered by (1)
3.0 kHz ±5 %
3.0 kHz ±5 %
10 kHz ±5 %
10 kHz ±5 %
[3] Discrete mA settings (0, 2, 4, 8, 12, or 20).
30 kHz ±5 %
30 kHz ±5 %
[4] In medium time constant mode, output range is limitied to ±8V for certain gain settings
100 kHz ±5 %
100 kHz ±5 %
[5] Measured at gain of 1,000 (60 dB), input referred.
Fault/Overload
Fault/Overload
[6] Measured at gain of 1 with low noise ICP® simulator. (High pass filter = 0.2Hz)
[13]
<0.03 pC/s
<0.03 pC/s
[7] Measured at gain of 1 mV/pC with 1 nF source capacitance.
[8] Measured at gain of 10V/pC (80 dB) with 1 nF source capacitance, input referred.
[9] Depends on gain setting. LCD displays value when gain is entered.
Keypad
Keypad
[10] When in ICP® mode, long TC is true DC response.
2 rows, 16 columns
2 rows, 16 columns
[11] 4 Digit - Selectable
[1]
RS-485
RS-485
[12] Can be increased using optional external 472B series charge attenuator.
9600 bps
9600 bps
[13] Long time constant charge mode only.
1, 8, 1, No
1, 8, 1, No
[14] Double width unit.
32 to 120 °F
0 to +50 °C
+15 at 230 mA
+15 at 230 mA
-15 at 140 mA
-15 at 140 mA
[2]
6.25
6.25
+28 at 5 mA + Sensor
+28 at 5 mA + Sensor
Current
Current
24 ±1 VDC
24 ±1 VDC
<50 mV
<50 mV
[3]
0 to 20 mA
0 to 20 mA
[4]
>±10 V
>±10 V
<1 Ohm
<1 Ohm
[5][6]
9 µV
-101 dB
[5][6]
<3 µV
<-110 dB
[6]
1 µV/√Hz
-120 dB
[6]
0.22 µV/√Hz
-133 dB
[6]
0.08 µV/√Hz
-142 dB
[6]
0.08 µV/√Hz
-142 dB
[6]
0.07 µV/√Hz
-143 dB
[7][8]
9 µV
-101 dB
[7][8]
<5 fC
<5 fC
[7]
0.8 µV/√Hz
-122 dB
[7]
0.20 µV/√Hz
-134 dB
[7]
0.08 µV/√Hz
-142 dB
[7]
0.08 µV/√Hz
-142 dB
[7]
0.07 µV/√Hz
-143 dB
100±1%
100±1%
1±1%
1±1%
159.2±1%
159.2±1%
[9][10]
SUPPLIED ACCESSORIES:
Up to 100,000
Up to 100,000
Model 070A02 Scope input adaptor (10-32 jack to BNC plug)
10, 100, 1,000 ±20%
10, 100, 1,000 ±20%
Model EE-79 443B Control Software (1 CD ROM)
± 10 V to ± 1 V
± 10 V to ± 1 V
BNC
BNC
Entered: LK
BNC
BNC
SMB
SMB
Date: 1/29/2018
[14]
5.05 x 3.6 in
128 x 92 mm
1.45 lb
0.66 kg
3425 Walden Avenue, Depew, NY 14043
OPTIONAL VERSIONS
except where noted below. More than one option may be used.
441A101 is (4). Other modules must be calculated not to exceed total power of 30 watts.
Engineer: CPH
Sales: WDC
Approved: DY
Date: 1/29/2018
Date: 1/29/2018
Date: 1/29/2018
Revision: F
ECN #: 47122
Spec Number:
14471
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
Advertisement
Table of Contents
