PCB Piezotronics 443B02 Installation And Operating Manual page 50

Manual 19854 Rev. D
ECN 50523
Ref Off;OV=1;Fault=0;"
The 443B102 in rack 0, slot 2 is setup as follows: ICP mode
with a constant current of 2 mA, output sensitivity is 10.00
mV/unit, transducer sensitivity is 1.023 mV/unit, low
frequency response is 2.0 Hz, low pass filter set to 10 kHz,
integration units are SI, the internal reference is off, the unit
is not overloaded, and there is no fault condition detected.
443B101/443B102 30