Table of Contents
Advertisement
2
Touch
to switch on the air purifier
(Fig.j).
» The air purifier beeps.
» The air purifier operates under
the auto purification mode by
default.
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3
Touch
for 3 seconds to switch off
the air purifier.
Note
• If the air purifier stays connected
to the electrical outlet after turning
OFF, the air purifier will operate
under the previous settings when
turned ON again.
• If the air purifier accidentally
shuts off during running, it restarts
automatically and operates under
previous settings when the power
supply is resumed.
Changing the fan speed
There are several fan speeds available.
You can choose the auto purification
mode (A), speed 1, 2, 3 or turbo mode
(t).
Auto (A)
•
Touch the fan speed button
repeatedly to select the auto
purification mode (Fig.k).
Allergen mode
The specially designed allergen
mode can effectively reduce common
allergens such as pollen and pet
dander.
•
Touch the fan speed button
select the Allergen mode (Fig.l).
» Auto (A) and
screen.
Manual
•
Touch the fan speed button
repeatedly to select the fan speed
you need (Fig.m).
Turbo (t)
In turbo mode, the air purifier operates
on the highest speed.
•
Touch the fan speed button
select the turbo mode (t) (Fig.n).
Light sensor
With the light sensor, the air purifier can
work according to the ambient light.
When the ambient light dims for
10 seconds, all the lights on the control
panel will be off slowly. During this
period, you can touch any of the
buttons, all lights will be on again. If you
don't perform other operations within
10 seconds, all lights will be off.
After the ambient light becomes bright
and lasts at least for 10 seconds, all
lights will be on again.
to
display on the
to
EN
7
Advertisement
Table of Contents
