Table of Contents
Advertisement
6 Replacing the
filter
Filter replacement
indicator
This air purifier is equipped with a
filter replacement indicator to make
sure that the air purification filter is in
optimal condition when the air purifier
is operating. When the filters need to be
replaced, the filter code displays on the
screen.
If the filters are not replaced in 14 days,
the air purifier will stop operating and
automatically lock.
Replacing the filters
Note
• The air filters are not washable or
reusable.
• Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
• Do not clean the filter with a
vacuum.
Filter alert light
Action
status
Replace
A3 displays on
NanoProtect filter
the screen
HEPA Series 3
(FY1410)
Replace the
C7 displays on
NanoProtect filter
the screen
Active Carbon
(FY1413)
A3 and C7
display on
Replace both filters
the screen
alternately
1
Turn off the air purifier and unplug
from the power socket.
2
Take out the used air filter according
to the filter alert light status
displayed on the screen (Fig.y).
Discard used filter.
Note
• Do not touch the pleated filter
surface, or smell the filter as it has
collected pollutants from the air.
3
Remove all packaging material from
the new filter (Fig.f).
4
Place the new filters into the air
purifier (Fig.g).
5
Put the plug of the air purifier in the
power socket.
6
Touch the
for 3 seconds to reset
the filter lifetime counter (Fig.z).
7
Wash your hands after changing a
filter.
EN
11
Advertisement
Table of Contents
