Contents 7 Storage 1 Important 8 Troubleshooting 2 Your air purifier Product overview 9 Guarantee and service Controls overview Order parts or accessories 3 Getting started 10 Notices Installing the filter Electromagnetic fields (EMF) 4 Using the air purifier Recycling Understanding the air quality light 6 Turning on and off Changing the fan speed...
Make sure that foreign • appliance. objects do not fall into the If the power cord is • appliance through the air damaged, you must have outlet. it replaced by Philips, a...
Page 5
Only use the original the plug of the appliance • Philips filters specially becomes hot. Make intended for this sure that you plug the appliance. Do not use any appliance into a properly other filters.
Page 6
Do not use this appliance Do not use the appliance • • when you have used in wet surroundings or in indoor smoke-type insect surroundings with high repellents or in places ambient temperatures, with oily residues, burning such as the bathroom, incense, or chemical toilet, or kitchen.
3 Getting started Congratulations on your purchase, and welcome to Philips! Installing the filter To fully benefit from the support that Philips offers, register your product at Note www.philips.com/welcome. • Make sure the air purifier is unplugged from the electrical outlet Product overview before installing the filter.
4 Using the air Put the plug of the air purifier in the wall outlet. purifier Touch to switch on the air purifier (fig. j). » The air purifier beeps. » The air purifier operates under the auto-purification mode by Understanding the air default.
Allergen mode Night sensing mode The specially designed allergen You can activate the night sensing mode can effectively reduce common mode in two ways. allergens such as pollen and pet dander. Activating the night sensing • Touch the fan speed button mode manually select the Allergen mode (fig.
5 Cleaning Note • The light sensor detects the lights in your room after 11 hours in the night sensing mode. • If the lights in your room are turned Note on, the air purifier will quit the night • Always turn the air purifier off and sensing mode and operate under unplug the air purifier from the the previous mode.
Press the clip down (1) and pull the Note pre-filter towards you (2) (fig. d). • If the air purifier is used in a dusty If the pre-filter is very dirty, use a soft environment, it may need to be brush to brush away the dust.
6 Replacing the Filter alert light Action status filter Replace A3 displays on NanoProtect filter the screen Series 3 (FY1410) Filter replacement indicator Replace the C7 displays on the NanoProtect filter screen This air purifier is equipped with a AC (FY1413) filter replacement indicator to make A3 and C7 display sure that the air purification filter is in...
Storage Filter reset You can replace filters even if there is no filter replacement code displayed on Turn off the air purifier and unplug the screen. After replacing a filter, you from the wall outlet. need to reset the filter lifetime counter Clean the air purifier, air quality manually.
This chapter summarizes the most common problems you could encounter with the air purifier. If you are unable to solve the problem with the information below, visit www.philips.com/support or contact the Consumer Care Center in your country. Problem Possible solution The air purifier •...
Page 15
• However, if the appliance produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips service center. • If the air purifier is too loud, change the fan speed to a The air purifier is lower fan speed level.
If to comply with all applicable legal there is no Consumer Care Centre in requirements and to stay well within the your country, go to your local Philips EMF standards applicable at the time of dealer. producing the products.
Page 17
Bedienungsanleitung heruntergeladen von der Website loveair.de...
Need help?
Do you have a question about the AC1217 and is the answer not in the manual?
Questions and answers