Table of Contents
Advertisement
3 Getting started
Installing the filter
Note
• Make sure the air purifier is
unplugged from the electrical
outlet before installing the filter.
• Make sure the side of the filter with
the tag is pointing towards you.
1
Pull the bottom part of the front
panel and then gently lift to remove
it from the air purifier (Fig.c).
2
Press the clip down (1) and pull the
pre-filter towards you (2) (Fig.d ).
3
Take out all filters (Fig.e).
4
Remove all packaging materials
from the filter (Fig.f ).
5
Place the thick filter (FY1410) into
the air purifier and then the thin AC
filter (FY1413) (Fig.g). The model
numbers are shown on each filter.
6
Attach the pre-filter back into the
air purifier (Fig.h).
Note
• Make sure the side with the clip is
pointing towards you, and that all
hooks of the pre-filter are properly
attached to the purifier.
7
Reattach the front panel by pressing
the top part of the panel onto the
top of the air purifier (1). Then, gently
push the panel against the body of
the air purifier (2) (Fig.i).
8
Wash your hands thoroughly after
installing filters.
6
EN
4 Using the air
purifier
Understanding the air
quality light
Air quality light
color
Blue
Blue-purple
Purple-red
Red
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
Turning on and off
Note
• Always place the air purifier on a
stable, horizontal, and level surface
with the front of the unit facing
away from walls or furniture.
• For optimum purification
performance, close doors and
windows.
• Keep curtains away from the air
inlet or air outlet.
1
Put the plug of the air purifier in the
power socket.
Air quality level
Good
Fair
Poor
Very Poor
Advertisement
Table of Contents
