Dometic Go Power! Solar Flex Kit GP-FLEX-55 User Manual page 10

4. INSTALLATION
• The Solar Charge Controller is designed to be mounted vertically in an indoor location inside a weatherproof enclosure.
Note
• Ideally the Solar Charge Controller should be located so it can be easily seen for monitoring system operation.
• The location will need access to the cable ends from the solar panels and the battery compartment.
WARNING: Failure to secure the Solar Charge Controller could cause it to become dislodged while the RV is in transit and
cause severe damage to the unit and/or the RV
.
4. INSTALLATION
Solar Panel
Refrigerator
Vent Cover
or Cable Entry Plate
L
MC4 Red Postive
MC4 Black Negative
Extension Cable (25 ft)
Extension Cable (25 ft)
PWM 30
Solar Charge
Controller
Inverter
Remote
Tr
Inverter
S
Fuse
Fuse
Fuse
Legend
Conve
Cha
Battery Bank
MC4 Connector
Ite
Weeke
"CLICK"
FIGURE 3-B
[page 10] | gpelectric.com