q w e
r
t
y u
i
Manual Buttonhole
If the diameter of the button is more than 2.5 cm (1˝),
a buttonhole must be made manually as follows:
Turn the handwheel toward you to raise the needle
q
to its highest position. Raise the presser foot lifter.
Set the pattern indicator at "BH" by turning the pat-
w
tern selector dial.
Attach the buttonhole foot (B).
e
Pull the buttonhole lever downward as far as it will
r
go.
Lower the needle into the garment where the but-
t
tonhole is to start, and lower the foot.
Sew the front bartack and left row, then stop the
y
machine after sewing the desired total length of
buttonhole.
Pull the buttonhole lever toward you.
u
Sew the back bartack and right row, then stop the
i
machine at the starting point.
To cut the opening and to reset for sewing the next
buttonhole, refer to the instructions on page 31.
26