Eneo IAR-7SE1024MMC Quick Installation Manual page 14

Items
Power Input
Input Voltage
Input Current
Power Output
Output Voltage
Output Current
Power Consumption
Connect the AC power cable to the switch through the power input interface. It is
recommended to use the AC power cable provided in the package.
Connect the switch to AC power. Check if the power indicator turns on, which means
the power is connected correctly.
24-Port PoE Switch
This series switch is equipped with one built-in power supply module.
Power supply module specifications:
Items
Power Input
Input Voltage
Input Current
Power Output 1
Output Voltage
Output Current
Power Consumption
Power Output 2
Output Voltage
Output Current
Power Consumption
Connect the AC power cable to the switch through the power input interface. It is
recommended to use the AC power cable provided in the package.
Connect the switch to AC power. Check if the power indicator turns on, which means
the power is connected correctly.
CAUTION

For better transmission performance, it is recommended to use
cables to connect the repeater and the equipment.

For better protection performance, it is recommended always make the ground
Specifications
AC 100~240V 50/60Hz
2A max
12V DC
5A max
60W (full load)
Specifications
AC 100~240V 50/60Hz
4.5A full load with 100V AC input voltage
54.5V DC
7.2A max
390W (full load)
12V DC
5A max
60W (full load)
11
Cat5 or better