Desktop Installation; Wall Mount; Ac Power Cable Connection - Eneo IAR-7SE1024MMC Quick Installation Manual

3.2.2 Desktop Installation

This series switch supports desktop installation. Users can put this product on clean,
stable, grounded workbench. The installation steps are as below:

Carefully put the device upside down, clean the grooves on the chassis backplane
with soft cloth to make sure there is no oil or dust in it.

Remove the stickers on the foot pad, paste the foot pad in backplane groove.

Carefully put the device upright on the workbench.

3.2.3 Wall Mount

This series switch supports wall-mounted installation. Users can put the switch on clean,
steady vertical wall. Installation steps are as below:
Step 1 Fix the hangers to the switch.
Step 2 Drill 4 holes on the wall where device is installed,
then drive the rubber plug into the hole. Drive these
screws into the hole for the rack and fix the product by
aiming at the rubber plug.

3.2.4 AC Power Cable Connection

24-Port Switch
The switch is equipped with built-in dual power supply modules.
Specifications of each power supply module are the same as below:
10
Accessories
Accessories
4*