Belkin F1DN108K-3 User Manual page 34

aPPendICes
SECTIONS
Table of Contents
step 5 – Place the displays and Create the Geometry
In the stage, the administrator will create his displays setup. The
administrator can drag and drop the monitors that were created in
proportion which reflects the size and shape of his actual monitors until he
create a view similar to his real environment.
Each display is clearly marked by his computer number and monitor
number as entered by the administrator in the previous stage.
Monitors can be connected or have some distance all based on the actual
geometry required.
Once the monitors are placed Yellow "bridges" will indicate area in which
the mouse "teleport" itself from one monitor to another.
Clicking on one of these areas will remove it which will prevent the mouse
cursor from "teleporting" through this bridge.
To enable the bridge between monitors, just drag one monitor to the desired
monitor, having them touch each other. Pull apart the monitors, and the
bridge should appear between the monitors again.
Belkin Secure 4/8 port KM Switch User Manual
®
1 2
examples:
example 1 – The following setup creates a corridor from the top right of
monitor 2 computer 2 to the top bottom left of monitor 1 computer 1.
Trying to drag the mouse through the red lines will not work.
example 2 – Both configurations below create identical setups in which the
mouse cursor moves from the right of computer 2 to the left of computer 1.
32
3 4 5 6 7