Belkin F1DN108K-3 User Manual page 42

aPPendICes
SECTIONS
Table of Contents
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
A copy of the European Union CE marking "Declaration of Conformity"
may be obtained at the website: www.belkin.com/doc
For information on product disposal please refer to www.belkin.com/
environmental
Belkin Secure 4/8 port KM Switch User Manual
®
1 2
australia declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that
the product F1DN104K-3 and F1DN108K-3, to which this declaration
relates, are in conformity with the requirements of AS/NZS regulations
for Class B Information Technology Equipment (ITE).
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
40
3 4 5 6 7