What Is Seamless Cursor Switching - Belkin F1DN108K-3 User Manual

overvIeW
SECTIONS
Table of Contents

What is seamless Cursor switching?

Seamless Cursor Switching (SCS) is implemented in Belkin Secure KMs to
enable seamless cursor and keyboard switching between multiple displays.
SCS allows administrators to configure any desired multiple display
configuration using the same, or different size displays and resolutions.
Simply move the mouse cursor across neighboring displays to switch
between connected computers.
Refer to the example in the figure on the right. Assume that computer #1 is
connected to the left display, computer #2 is connected to the top display,
computer #3 is connected to the center bottom display and computer #4 is
connected to the display on the right side. In this example all four displays
are identical. SCS allows the user to move the mouse cursor across the four
displays while automatically switching the shared peripherals (keyboard,
mouse and audio) based on the current cursor location. For example, when
the user moves the cursor from the left display to the center bottom display,
the KM identifies the display border crossing between these two displays
and switches the keyboard and mouse to computer #3.
SCS is now further enhanced with the inclusion of pointing device drivers
to support dual, triple and up to 16 head computers. With this technology,
user workstations may be integrated with any combination of single, dual,
triple and quad head computers. SCS Configurator software enables the
user administrator to easily configure any set of display sizes, resolutions,
geometry and physical arrangements.
Belkin Secure 4/8 port KM Switch User Manual
®
1 2
9
3 4
KM switches from channel 3 to 2
1
KM switches from channel 1 to 3
PC1
5 6
2
KM switches from channel 2 to 3
KM switches from channel 3 to 4
3 4
KM switches from channel 4 to 3
PC2
7