Ac Power Cable Connection - Eneo IAR-7SE2016MMA Quick Installation Manual

3.2.4 AC Power Cable Connection

This series switch is equipped with one built-in power supply module.
Power supply module specifications:
Items
Power Input
Input Voltage
Input Current
Power Output
Output Voltage
Output Current
Power Consumption
Connect the AC power cable to the switch through the power input interface. It is
recommended to use the AC power cable provided in the package.
Connect the switch to AC power. Check if the power indicator turns on, which means
the power is connected correctly.
CAUTION

For better transmission performance, it is recommended to use Cat5 or better
cables to connect the switch and powered devices.

For better protection performance, it is recommended always to make the ground
connection first and disconnect it at the end when operating the unit.

Power on the system only after confirming that the wiring is correct, to avoid
damage to the equipment.

Read the user manual carefully before operating or maintaining the repeater to
avoid misoperation.
The installation steps are finished.
Specifications
AC 100~240V 50/60Hz
4A max
54V DC
5.2A max
280.8W (Full load)
9