Step 4
Adjust the calibration coefficients if the generated coefficients are not satisfying. The
adjustment page is similar to that for a new receiver card.
Step 5
Save the calibration coefficients to the hardware (FLASH) so they won't be lost when the
LED display is powered off. The operation is similar to that for a new receiver card.
Adjust Coefficients
If some parts of the LED display are different from the rest in color, the color of these areas
can be adjusted by modifying the corresponding calibration coefficients.
Step 1
Select the areas to be adjusted. Fig.9-28 shows the page for ar
Fig 9-27
Fig 9-28
ea selecting.
89