Table of Contents
Advertisement
Step 3
Shown in Fig.9-15 is the page for Step 3.
Fast Upload
The uploading speed will be set as maximum thus the time required for uploading is
minimized if this option is selected.
Stable Upload
The uploading process is more stable and reliable for this option. But the time required is
longer than the Fast Upload option.
Upload
Click this button to upload the selected calibration coefficients to the hardware.
Save
Save the selected calibration coefficients to hardware (FLASH). The saved data won't be
lost even the system is powered off.
Save Coefficients to Database
This operation is to read back the calibration coefficients form the current LED display and
save them to a database file.
Step 1
The calibration coefficients read back can be saved to an existing database or a new
database. Shown in Fig.9-16and Fig.9-17 are the pages for saving coefficients to an
existing database and a new database respectively.
Fig 9-15
79
Advertisement
Table of Contents
