Table of Contents
Advertisement
9.9 Check Hardware Info
Click Tool ->Hardware Information from the main menu to open the Hardware Information
page. Shown in Fig.9-12 is the Hardware Information page.
Fig 9-12
Current Serial Port If more than one Mars serial LED display control system is connected
to the computer, set the serial port through which the Mars serial LED display control system
to be configured as the current serial port.
Time of Hardware This is the date and time of the current Mars serial LED display control
system. Click Read button to update the hardware time shown in the Time panel. Click Set
button to set the time of the current Mars serial LED display control system as that of the
computer.
Hardware Version This includes the version information of the MCU, sending boards and
receiver cards.
Sending Board SN Listed are the SNs of all sending boards of the current serial port. To
update the listed SNs, click Refresh button.
73
Advertisement
Table of Contents
