Delivering Hot Water; Changing The Quantity Of Hot Water; Making Cappuccino - Electrolux EBC65 User Manual

Automatic coffee maker
Table of Contents

Advertisement

11. DELIVERING HOT WATER

• Always make sure the appliance is
ready.
• Make sure the hot water spout is in
place (fig. 21); position a container
under the spout (fig. 22).
• Press the
hot water flows out of the hot water
spout into the container.
You should not deliver hot water for
more than 2 minutes at a time.

12. CHANGING THE QUANTITY OF HOT WATER

The machine is set by default to automat-
ically delivery 200 ml of hot water.
To change these quantities, proceed as
follows:
• Place a container underneath the hot
water spout.
• Press the
menu or press the
and (B8) until "PROGRAM HOT WA-
TER" is displayed.
• Press the OK icon (B9) to confirm.
• Select the required quantity of water
by pressing the

13. MAKING CAPPUCCINO

Set the quantity of coffee you want
to use to make the cappuccino in
the "Program cappuccino" function
in the menu.
• Select the taste of the coffee you want
to use to make the cappuccino by
pressing the
• Remove the lid of the milk container.
• Fill the container with about 100 grams
of milk for each cappuccino to be pre-
pared (fig. 15). Never exceed the MAX
level (corresponding to about 750 ml)
marked on the container. You should
ideally use skimmed or semi-skimmed
milk at refrigerator temperature (about
5°C).
• Make sure the intake tube is correctly
inserted in the rubber washer (fig. 16)
then replace the milk container lid.
icon (B13) (fig. 23) and
icon (B2) to enter the
icons (B7)
icons (B7) and
icon (B4).
To interrupt, press the
or the
icon (B6). The appliance
stops delivery once the set quantity is
reached.
(B8). The progress bar shows the
quantity of water selected.
• Press the OK icon (B9) to confirm (or
the
icon (B6) to cancel the opera-
tion.
• Press the
icon (B6) twice to exit
the menu.
• The appliance is now reprogrammed
with the new settings and is ready.
• Position the frothed milk regulator (C1)
between the words CAPPUCCINO
and CAFFELATTE printed on the milk
container lid.
The quantity of froth can be adjusted
by moving the regulator towards the
word CAFFELATTE for a denser froth.
Moving it towards the word CAPPUC-
CINO obtains a less dense froth.
NO froth
"Denser"
froth
frothed milk regulator
"Less dense" froth
ENGLISH
11
icon (B13)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kbc65

Table of Contents