Preparation
Espresso
•
Fill the container with water.
•
Insert the plug into a suitable wall outlet and use the On/Off switch to turn on the
appliance. The main indicator light and temperature indicator light will be turn on.
•
Set the selector to the hot-water position (button released).
•
Preheat the filter holder and the cup(s).
•
Remove the filter holder, fill with ground coffee and re-attach it.
•
Place the cup(s) underneath the outlets.
•
When the temperature indicator light turns off, turn the operating dial to position
. The espresso is now delivered straight into the cup(s).
•
Once the cup(s) are full, turn the valve selector to its neutral position to switch the
pump off.
•
Wait for approximately 30 seconds before detaching the filter holder and
removing the coffee grounds.
•
The espresso maker is now ready for another brewing cycle.
Dispensing hot water
•
Place a cup under the steam nozzle.
•
Turn the operating dial to the
•
Once the desired quantity of hot water has been collected, turn the operating dial
to its neutral position to switch the pump off.
position.
EN
9