Electrolux EBC65 User Manual page 18

18 www.electrolux.com
(B9) to confirm.
• Use the
set the minutes, then press the OK
icon (B9) to confirm.
• Press the
menu.
18.5 Setting auto-start time
This function programmes the time the
machine will come on automatically.
• Make sure the clock on the appliance
has been set.
• Press the
menu and then the
and (B8) until "START TIME" is dis-
played.
• Press the OK icon (B9).
• Use the
set the auto-start time, then press the
OK icon (B9) to confirm.
• Use the
set the minutes, then press the OK
icon (B9) to confirm.
• Press the e
to activate the auto-start function until
"AUTO START" is displayed.
• Press the OK icon (B9) to confirm.
"AUTO START PLEASE CONFIRM" is
displayed.
Press the OK icon (B9).
The
• Press the
menu.
• To disable auto-start, press the
icon (B2), then the
and (B8) until "AUTO START" is
displayed. Press the OK icon (B9).
"PLEASE CONFIRM" is displayed.
Press
symbol disappears.
18.6 Changing coffee
temperature
To change coffee temperature, proceed
as follows:
• Press the
menu and then the
and (B8) until "TEMPERATURE" is
displayed.
• Press the OK icon (B9).
icons (B7) and (B8) to
icon (B6) to exit the
icon (B2) to enter the
icons (B7)
icons (B7) and (B8) to
icons (B7) and (B8) to
icons (B7) and (B8)
symbol appears on the display.
icon (B6) to exit the
icons (B7)
(B6) to disable, the
icon (B2) to enter the
icons (B7)
• Press the icons (B7) and (B8) to
select the required coffee temperature
from low, medium and high.
• Press the OK icon (B9) to confirm the
temperature selected.
• Press the icon (B6) to exit the
menu.
18.7 Setting water hardness
The operating period can be extended if
required, making descaling less frequent
by programming the machine on the
basis of the real lime content in the water
used.
Proceed as follows:
• remove the "Total Hardness Test" strip
(attached to page 2) from its packaging
then dip it fully in the water for a few
seconds.
Then remove and wait about 30 sec-
onds (until it changes colour and forms
red squares).
• turn the appliance on by pressing the
ON//stand-by button (A7).
• Press the icon (B2) to enter the
menu and then the
and (B8) until "WATER HARDNESS" is
displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8)
until the number coincides with the
number of red squares on the test strip
(for example, if there are 3 red squares
on the test strip, select the message
"WATER HARDNESS 3" .
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed
to provide the descale warning when
actually necessary.
18.8 Programming coffee
For instructions on programming coffee,
see the "CHANGING THE QUANTITY
OF COFFEE IN THE CUP" section.
18.9 Programming cappuccino
For instructions on programming cap-
puccino, see the section "CHANGING
THE QUANTITY OF MILK AND COFFEE
icons (B7)