Paper Specifications - Epson C31C514452 Technical Reference Manual

1.5.2.1 Paper Specifications

Paper feeding method:
Paper feed interval:
Paper feed speed:
Roll paper width:
Maximum diameter:
Core:
Normal paper
specifications:
Carbon paper
specifications:
Rev. H
Friction feed
Initial setting: Approximately 4.23mm {1/6"}
Can be set in units of approximately 0.18mm {1/144"} by
ESC/POS command
30 lps (approximately 4.99" /s)
(during continuous feeding)
 
76 0.5 mm (3" 0.02") / 69.5

/ 57.5 0.5 mm (2.26"
83 mm (3.27")
When there is no near-end detector, always be sure to use roll
paper that is not glued to the core.
Paper thickness: 1 sheet: 0.06 to 0.085mm {0.0024 to 0.0033"}
Weight: 52.3 to 64 g/m
(45 to 55 kg/1000 sheets 1091  788mm)
Number of copies: Original 1 sheet + one copy sheet
Thickness: 0.05 to 0.08 mm {0.002 to 0.0031"}
Recommended paper:
Paper by Mitsubishi - Carbonless paper (blue)
Top sheets:
N40Hi (paper thickness: 0.06mm {0.0024"},
mass: 47.2 g/m
Bottom sheet
N60 (paper thickness: 0.08mm {0.0031"},
mass: 68.0 g/m
The copying capability is affected by the ambient temperature,
and is guaranteed for the temperature ranges of 5 - 50C {41 -
122F}.
TM-U220 Technical Reference Guide
[lps: lines per second]

0.5 mm (2.74"

0.02")
2
{14 to 17 lb}
(thickness of one sheet);
2
{12.6 lb}
2
{18 lb}
General Information 1-9

0.02")