Printer Stops Printing / Printer Repeats Printing On A Line - Epson C31C514452 Technical Reference Manual

2. Turn off the printer, and close the roll paper cover, and turn it back on. Then the cutter blade
returns to the normal position. If you would like not to turn off the printer, send an error
recovery command and initialize printer command instead.
3. If the cutter blade doesn't return to the normal position, return the cutter blade to the normal
position by rotating the autocutter knob in the direction of the arrow. When it is returned to
the normal position, a lever comes into the center of hole in the autocutter frame.
Autocutter unit
4. Close the roll paper cover.

4.4 Printer Stops Printing / Printer Repeats Printing on a Line

When you connect the wrong power supply unit, printer will not perform correctly. See below
to determine which power supply unit should be connected to the printer.
TM-U220 Alphanumeric model (Type A,B, D)
AC Adapter,C, AC Adapter,C1, or PS-180 (option)
4-4 Troubleshooting
Cutter cover
Hole
Knob
TM-U220 Multilingual model (Type A,B, D)
PS-180 or AC Adapter,C1
Lever
Rev. H