Cutting Position From Print Start Position - Epson C31C514452 Technical Reference Manual

6.2.1.3 Cutting position from print start position

The TM-U220 has almost the same distance from the auto cut position to the print start position
as the TM-U300. Therefore the top margin is same as previous one when you replace the
TM-U300 with the TM-U220 with an autocutter. In other cases, please refer the table and figures
below.
Cutting position
A/C position to print start position
Manual cut position to print start
position
Paper feed direction
36 mm
26 mm (Type A, B)
28 mm (Type C, D)
Paper feed direction
34.9 mm
27 mm
Paper feed direction
22.1 mm
6-10 Notices for Replacement of the TM-U210/TM-U300
TM-U300 (Type A,B, C, D)
36mm
26mm (type A, B)
28mm (type C, D)
Auto cut position line
Manual cut position line
Print start position line
Manual cut position line
Auto cut position line
Print start position line
Manual cut position line
Print start position line
TM-U220 (Type A,B, D)
27mm
Type D: 22.1mm
TypeA,B: 34.9mm
TM-U300 (Type A, B, C, D)
TM-U220 (Type A, B)
(When using 76mm roll paper)
TM-U220 (Type D)
(When using 76mm roll paper)
These values are reference value
Rev. H