Table of Contents
Advertisement
3. To secure the Antenna Feed to the Dish Reflector:
a. Replace the knob and tighten it by hand until the knob
touches the surface of the Mounting Bracket.
b. Use a wrench or channel lock pliers to tighten the knob
an additional ¼ turn. Do NOT over‑tighten the knob.
Note:
attached by the knob.
Important:
Feed once the feed is attached.
Ensure that the Antenna Feed is securely
Do NOT handle the antenna by the Antenna
*640-00161-04*
640-00161-04
Advertisement
Table of Contents
