Panasonic UF-8100 Service Manual page 80

12. Press "STOP" first and then press "FUNCTION" + "CLEAR" keys sequentially to return to standby.
13. Turn the Power Switch on the back of the machine to the OFF position.
14. Reconnect the Telephone Line, LAN and/or USB Cables.
15. Turn the Power Switch on the back of the machine to the ON position.
Note:
Repeat steps 6 to 10 to continue formatting other SD Card(s).
3.5.7. Firmware Emergency Recovery
The easiest method to recover the firmware in an Emergency Recovery routine is to use the Master SD
Memory Card method (1 SD Memory Card required if the SD Memory Card capacity is Large enough
size for all necessary Firmware).
If the Master SD Memory Card includes all necessary firmware as a package, all necessary firmware can
be recovered once which including PCL option configurations, except the 2nd G3 Fax option.
After recovering, if optional 2nd G3 firmware is required, use the Network Firmware Update Tool, the
Local Firmware Update Tool or use the Master SD Memory Card to update the firmware selecting the
"Auto Mode" to the required level.
If the unit does not boot up properly, follow the steps below:
1. Turn the power OFF.
Before proceeding to the next step, you must create the Master SD Memory Card (read the
appropriate sections first 3.5.5).
2. Turn the power On while holding the [ENERGY SAVER] button.
3. When the green lamp on the front panel turns On, release the [ENERGY SAVER] button.
The unit is now ready to accept the firmware code from Master SD Memory Card.
If there is additional 2nd G3 firmware code file to be updated, use the Master SD Memory Card to update
the firmware using the "Auto Mode" again.
3.5.8. Firmware Version
SC :
Ver. 2.1
UF-8000 or 7000
A A Vxxxxx
UF-8100 or 7100
(a) AU
Destination Code (Fax)
AU : USA/Canada
EB : UK etc.
Division Soft
(When it is divided into (a) and (b))
Firmware Version (V1xxxx)
Language Code
A : A-English, C-French & Spanish
etc.
Firmware Type
A : Standard
B, C : Optional
Model Number
80
UF-7000/8000
UF-7100/8100
APR 2007