Panasonic UF-8100 Service Manual page 166

No. Parameter
123 One Ring Sound
(USA and Canada
Only)
124 ~ Not Used
199
-
200 ~
299
Note 1: Continuous Polling (Station Mode)
This feature allows you to Store or Add documents into a Polled file in memory.
To enable the Continuous Polling feature set the Function Parameter No. 003 to "2:STN"
(Station).
Depending on the setting of the User Parameter (Facsimile) "No. 119: QWERTY KEYBOAD",
one of the following operations is available:.
1. One-Touch
The upper "40" (40↑) Key is reserved for "Store 4 Polling" function, and cannot be changed.
To prepare document(s) to be polled, simply place the document(s) on the ADF, then press the
"-" (40) Key on the Keyboard (40↑ = LOWER Indicator turned OFF) to Store or Add document(s)
into a Polled file.
2.Quick Name Search
Press "S" (13) Key to search the "Store 4 Polling" name instead.
To prepare document(s) to be polled, simply place the document(s) on the ADF and press the
"S" (13) Key to search for "Store 4 Polling", then press "START" Key to Store or Add
document(s) into a Polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Signal
MCF/PIP
RTP/PIP
RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Ver. 2.1
Function Parameter Table
Selections
1 = Off
2 = On
1:128 2:256
0-31 0-63
32-63 64-127
64-127 128-255
Signal
1:5%
MCF/PIP 0-2
RTP/PIP 3-4
RTN/PIN 5-
When Function Parameter No. 45 "Ring Detect
Count" is set to 1 Ring, and this parameter is
enabled (On), the machine will only ring once out
loud, answering on the second ring count.
See Note 5
Setting
3:512 4:1024
0-127 0-255
128-255 256-511
256-511 512-1023
Setting
2:10% 3:15%
0-4 0-7
5-9 8-14
10- 15-
166
Function
5:2048 6:Off
0-511 Always
512-1023 -
1024-2047 -
4:20%
0-9
10-19
20-
UF-7000/8000
UF-7100/8100
APR 2007