Panasonic UF-8100 Service Manual page 3

Important Notice
Please read this notice completely BEFORE installing any optional
accessories. As failure to properly install the additional board or
connector with the power ON could damage the machine's SDR or
SC board.
Please follow the instructions below:
1. It is essential that you turn OFF the Main Power Switch located
on the Rear Side of the machine.
2. It is essential that you unplug the AC Power Cord from the wall
outlet. (During a Lightning Storm, to prevent electrocution
disconnect the Telephone Line Cable first before unplugging the
AC Power Cord)
3. Please read the installation instructions carefully and follow each
step.
* The specifications are subject to change without notice. Panasonic Communications Co., Ltd. reserves
the right to make improvements in the product design without reservation and without notice.
<Example: UF-8000>
Note:
O = Power OFF, l = Power ON
3