Ver. 2.1
(8) Disconnect the Harness on the PNL1 PC Board
(CN230).
(9) Release the Harness from Latch Hook.
(10) Disconnect all the Harnesses on PNL1 PC
Board as illustrated.
(11) Remove 2 Screws (X8).
(12) Remove the PNL1 PC Board (2102).
(13) Disconnect the Harness on the PNL2 PC Board
(CN253).
(14) Remove 7 Screws (X8).
(15) Remove the PCB Holder (118).
45
UF-7000/8000
UF-7100/8100
APR 2007