Panasonic UF-8100 Service Manual page 165

No. Parameter
082 JAM Length
083 Not Used
084 Line As No Paper 1 = Ring (ring)
085~ Not Used
086
087 Darker Level
088 Normal Level
089 Lighter Level
090~ Not Used
091
092 Smoothing
093 ~ Not Used
094
095 Reduction Ratio
096 ~ Not Used
109
110 MAC Address
111 Not Used
112 Insert EMAIL TXT 1 = Off
113 ~ Not Used
114
115 Time Zone
116 Overwrite
Warning
117~ Not Used
121
122 LDAP
Ver. 2.1
Function Parameter Table
Selections
1 = 1 m
2 = 2 m
2 = Busy (keep line busy)
0 = Lightest Contrast
~
15 = Darkest Contrast
1 = Off
2 = On
(70-100)
2 = On
1 = Scroll
2 = Direct
1 = Yes
2 = No
1 = Off
2 = On
Selects the maximum length of the original that can
be scanned.
Selects whether to ring or send a busy tone to the
remote station when the recording paper runs out or
the unit cannot receive because of any trouble.
Selects the contrast level.
→15
0←
Lightest← →Darkest
Selects whether the smoothing function is available.
Selects Print Reduction Ratio(%).
Indicates the MAC Address.
Selects whether the Text Template (email message)
is programmable and added on all email sent in the
message body above the top line of text. (Up to 40
characters Programmed in the User Parameters.)
Note:
After enabling this feature, aside from entering
the text in the User Parameters, it also has to be
activated in each Auto Dial Number before it will
take effect. It does not work for Direct Dialed
Numbers.
Selects the setting method for Time Zone.
Scroll : Allows using "Scroll Keys" to scroll
through the Time Zone Table.
Direct : Allows you to input the Time Zone
directly, (*) key to be used as a switch
between +/-.
Selects whether the Overwrite Warning is included
on the Internet FAX Result Receipt when
programming the Auto Dialer via email.
Selects whether to use the LDAP Server. Special
characters used in the LDAP, may not be
recognized and display incorrectly.
165
UF-7000/8000
UF-7100/8100
Function
APR 2007