Sata And Rst Configuration; Pci Express Configuration - DFI CS631-C246 User Manual

X Advanced

SATA And RST Configuration

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
SATA And RST Configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
SATA Controller Speed [Auto]
Serial ATA Port 0 Empty
Port 0 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 1 Empty
Port 1 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 2 Empty
Port 2 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 3 Empty
Port 3 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 4 Empty
Port 4 [Enabled]
Hot Plug [Disabled]
Serial ATA Port 5 Empty
Port 5 [Enabled]
Hot Plug [Disabled]
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
SATA Controller(s)
This field is used to enable or disable the Serial ATA controller.
SATA Speed
This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Control-
ler Interface).
Intel RST Premium With Intel Optane System Acceleration This option allows you to create
RAID or Intel Rapid Storage configuration along with Intel
tion on Serial ATA devices.
Use RST Legacy OROM
This field shows up when SATA Mode Selection is set to Intel RST Premium With Intel Optane
System Acceleration. Enable or disable to use RST Legacy OROM when CSM is enabled.
Port 0/1/2/3/4/5 and Hot Plug
Enable or disable the Serial ATA port and its hot plug function.
User's Manual | CS631
X Chipset

PCI Express Configuration

E n a b l e o r d i s a b l e S ATA
PCI Express Configuration
Device.
PCIE4
X
PCIE5
X
M.2
X
Mini PCIE1
X
PCIE2
X
LAN2(I211)
X
PCIE6
X
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Select one of the PCI Express channels and press enter to configure the following settings.
PCIE4/PCIE5/M.2/Mini PCIE1/PCIE2/LAN2(I211)/PCIE6
Enable or disable the PCI Express Root Port.
PCIe Speed
Select PCIe Speed of the current port — AUTO, Gen1, Gen 2, or Gen3. Gen 3 is only available for
the PCIE1 port. This field may not appear when the speed of the port is not configurable.
Hot Plug
Enable or disable hot plug function of the port. This field may not appear when the port does
not support hot plug.
Optane system accelera-
® ™
X PCH-IO Configuration
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
Chapter 3
BIOS SETTINGS
PCI Express Root Port Set-
tings.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
42